Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

UC520 SIP Incoming OK Outgoing Fail

Hi I've a UC520 and im tring to connect to a Voip Supplier "Engin"

it is regestering

and i can recieve calls but i cannot make any calls

the debug logs shows disconnect (47) "No Resouces"

i'm complealy stumped

i've attached a copy of the incoming and outgoing log and a show tech

Thanks

Leslie

Everyone's tags (2)
3 REPLIES
Cisco Employee

UC520 SIP Incoming OK Outgoing Fail

Hello Leslie,

I would try to remove the keepalive target and the keepalive time and re register with the SIP provider.

under sip-ua:

no keepalive taget

no timers keepalive

HTH,

Alex

*Please rate helpful posts

Community Member

Found the outgoing SIP calls

Found the outgoing SIP calls where not being resolved though DNS properly

it looks like it has resolved correctly in the log 

003450: Mar  5 06:02:59.103: //-1/xxxxxxxxxxxx/SIP/Info/sip_dns_type_srv_query: IP Address of vic-vsbc.byo.engin.com.au is:

003451: Mar  5 06:02:59.103: //-1/xxxxxxxxxxxx/SIP/Info/sip_dns_type_srv_query: 203.161.164.69

but we had to change 

outbound-proxy dns:byo.engin.com.au

 

to

outbound-proxy ipv4:203.161.164.69:5060

Community Member

Found the outgoing SIP calls

 

 

159
Views
0
Helpful
3
Replies
CreatePlease to create content