Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

UC540 at multiple locations

Hello,

We have three offices within a city. And we will have one UC540 per site. The question is can I configure UC540 in the way that users from one office will be able to call users from the second/third office via VPN and vice versa. But each office location will call landlines via onboard FXOs.

Thanks a lot!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

UC540 at multiple locations

Hi Safar,

Thank you for the good rating.

Please check the following document ( it is old but it is still the same):

https://supportforums.cisco.com/docs/DOC-9775

Also CCA 3.2.1 admin guide pages 467 to 495.

As it is already written about I am sending you the links. If you have more specific questions I will be happy to answer.

HTH,

Alex

4 REPLIES
Cisco Employee

UC540 at multiple locations

Hello Safar,

You may use CCA multisite manager to accomplish this. You need to have only the data vlan with different subnets.

Please tell if you will need further information.

HTH,

Alexander Maroukian

*Please rate helpful posts

New Member

UC540 at multiple locations

Hi Alex,

thanks a lot for the info, however I still don't have a clear understanding of how it will work. Could you please reveal the topic further?

BR,

Safar.

Cisco Employee

UC540 at multiple locations

Hi Safar,

Thank you for the good rating.

Please check the following document ( it is old but it is still the same):

https://supportforums.cisco.com/docs/DOC-9775

Also CCA 3.2.1 admin guide pages 467 to 495.

As it is already written about I am sending you the links. If you have more specific questions I will be happy to answer.

HTH,

Alex

New Member

UC540 at multiple locations

Hi Alex,

thanks a lot! That the info I needed.

BR,

Safar.

706
Views
5
Helpful
4
Replies
CreatePlease to create content