Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

UC540 auto attendant drops external SIP call

When a call comes into Auto Attendant and caller makes selection there is a moment of silence and the call disconnects.  This is on a SIP trunk from Vitelity.  Any option the caller chooses (transfer by name, transfer by number, etc) the call drops.  If I dial internally, everything works fine.  It is only on external calls over the SIP trunk.

Any ideas?  Thanks                  

5 REPLIES
Hall of Fame Super Gold

UC540 auto attendant drops external SIP call

This is often asked had you searched before asking.

voice service voip

sip no supplementary-service sip moved-temporarily

sip no supplementary-service sip refer

New Member

UC540 auto attendant drops external SIP call

Thank you! I tried searching and read many articles.  Guess i used the wrong key words.

Maybe you could help me on another issue:

At another site.  External SIP call comes into Auto Attendant.  It does not recognize any DTMF.  I have read this was an issue in older CCA but I am running the latest version of 8.2.

Thanks for your help.

Hall of Fame Super Gold

Re: UC540 auto attendant drops external SIP call

Need dtmf-relay set properly.

I don't know anything about CCa and can't help with that.

New Member

UC540 auto attendant drops external SIP call

can you point me where to find an article on how to set dtmf-relay properly?

Thanks

New Member

UC540 auto attendant drops external SIP call

I would suggest getting to know the IOS command line configuration method.

Using CCA inserts pages of verbose code that makes troubleshooting 100x harder.

But to answer your question, try playing with the sip service-moved temporarily option under voice service voip.

392
Views
0
Helpful
5
Replies
CreatePlease to create content