Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

UC540 expansion port

Can a Cisco SG300-28P switch be used with the expansion port on a UC540W?

3 ACCEPTED SOLUTIONS

Accepted Solutions
Community Member

UC540 expansion port

Yes.  The 200 and 300 series are supported via CCA also.

Community Member

Re: UC540 expansion port

Be sure to upgrade the firmware on the switch and it will work with no

problems

David Dunlap

SBSC UC Support Engineer

CCNA, SCCP SIP certified

& CCNA-Voice

10:00am to 7:00pm EST

Monday to Friday

daviddun@cisco.com

Office +1 (866) 606-1866 ext. 601050

Fax +1 (866) 875-3916

Cisco Steps to success for UC500 platform

<>

https://supportforums.cisco.com/docs/DOC-16634

Cisco SMB support forum

<>

https://supportforums.cisco.com/community/netpro/small-business

Cisco Technical Enablement Labs

<>

https://supportforums.cisco.com/docs/DOC-9836

Partner CVENT Calender

<>

4efb&t=http%3a%2f%2fwww.cvent.com%2fEVENTS%2fCalendar%2fCalendar.aspx%3fcal%

3d313c653e-5061-464b-9bc8-56ab83b20f47&s=%3cimgborder%3d%220%22src%3d%22ht

tp%3a%2f%2fcustom.cvent.com%2f7A5FE47695D247ABA545F93364B0665E%2fpix%2f49e30

e3eb8074b1bb95f4dacf65eaa42.JPG%22+alt%3d%22%22%2f%3e> Description:

Description:

http://custom.cvent.com/7A5FE47695D247ABA545F93364B0665E/pix/49e30e3eb8074b1

bb95f4dacf65eaa42.JPG

Community Member

Re: UC540 expansion port

Marcus Casimir wrote:

"Friends don't let friends use SIP!"

Of course they do Friends don't let Friends stay in a proprietary world, friends encourage other friends to work within an open socieity (LONG LIVE FOSS!!)

Errr back on topic

Devin make sure you upgrade your SG/SF to version 1.1.8, I have had the best success with this revision and it is the latest (Last time I looked). But here is a hint, make sure that within CCA you go to the SmartPort configuration of that switch (Right Click on it) and set all the ports up to "IP Phone+Desktop" and the ports that is plugged into the expansion port set for "Switch" and make changes to the other ports that require it to their appropriate settings.

The SF/SG series switches do not seem to accept the changes as fluid as the ESW range did, they are pretty good switches, don't get me wrong, but their interoperability with CCA/UC still seems to be a little off.

Cheers,

David.

Cheers, David Trad. **When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) *
4 REPLIES
Community Member

UC540 expansion port

Yes.  The 200 and 300 series are supported via CCA also.

Community Member

Re: UC540 expansion port

Be sure to upgrade the firmware on the switch and it will work with no

problems

David Dunlap

SBSC UC Support Engineer

CCNA, SCCP SIP certified

& CCNA-Voice

10:00am to 7:00pm EST

Monday to Friday

daviddun@cisco.com

Office +1 (866) 606-1866 ext. 601050

Fax +1 (866) 875-3916

Cisco Steps to success for UC500 platform

<>

https://supportforums.cisco.com/docs/DOC-16634

Cisco SMB support forum

<>

https://supportforums.cisco.com/community/netpro/small-business

Cisco Technical Enablement Labs

<>

https://supportforums.cisco.com/docs/DOC-9836

Partner CVENT Calender

<>

4efb&t=http%3a%2f%2fwww.cvent.com%2fEVENTS%2fCalendar%2fCalendar.aspx%3fcal%

3d313c653e-5061-464b-9bc8-56ab83b20f47&s=%3cimgborder%3d%220%22src%3d%22ht

tp%3a%2f%2fcustom.cvent.com%2f7A5FE47695D247ABA545F93364B0665E%2fpix%2f49e30

e3eb8074b1bb95f4dacf65eaa42.JPG%22+alt%3d%22%22%2f%3e> Description:

Description:

http://custom.cvent.com/7A5FE47695D247ABA545F93364B0665E/pix/49e30e3eb8074b1

bb95f4dacf65eaa42.JPG

Community Member

Re: UC540 expansion port

Arthur Dunlap wrote:

Be sure to upgrade the firmware on the switch and it will work with no

problems

David Dunlap

SBSC UC Support Engineer

CCNA, SCCP SIP certified

& CCNA-Voice

"Friends don't let friends use SIP!"

Community Member

Re: UC540 expansion port

Marcus Casimir wrote:

"Friends don't let friends use SIP!"

Of course they do Friends don't let Friends stay in a proprietary world, friends encourage other friends to work within an open socieity (LONG LIVE FOSS!!)

Errr back on topic

Devin make sure you upgrade your SG/SF to version 1.1.8, I have had the best success with this revision and it is the latest (Last time I looked). But here is a hint, make sure that within CCA you go to the SmartPort configuration of that switch (Right Click on it) and set all the ports up to "IP Phone+Desktop" and the ports that is plugged into the expansion port set for "Switch" and make changes to the other ports that require it to their appropriate settings.

The SF/SG series switches do not seem to accept the changes as fluid as the ESW range did, they are pretty good switches, don't get me wrong, but their interoperability with CCA/UC still seems to be a little off.

Cheers,

David.

Cheers, David Trad. **When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) *
3321
Views
0
Helpful
4
Replies
CreatePlease to create content