Hi All, we have a UC540 installed with remote VPN phones, after changing the exyernal ip address and deleting and recreating the NAT rules, the computers behind UC have internet connection , but the UC itself has no internet connectivity(tested through ping command) and there is no access for VPN from outside, any ideas?
You should check the ACL attached to the WAN interface.
Also you should change the ip address of the ssl vpn gateway.
If you are using CCA you just delete SSL vpn and add it again also you may look for the access list attached to FE0/0 and change the old ip address with the new one. Also check the name servers set for the UC.
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...