Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

UC540 with Cbeyond SIP- new configuration in Atlanta

Cbeyond apparently updated something on their end and our system stopped working. 

We added the outbound proxy setting and are able to place outbound for 23 seconds before being disconnected; inbound doesn't ring at all.

Proxy Server (primary)  sipconnect.atl0.cbeyond.net

Registrar:  sipconnect.atl0.cbeyond.net

Outbound Proxy:  sip-proxy.atl0.cbeyond.net

DNS servers are correct. 

I did a factory reset thinking a config change along the way was getting the way but same problem. Just used the telephone wizzard and then entered the SIP trunk info to try and keep it as simple as possible. 

Question is does anyone know anything about whats going on with them?  Or how to fix it?

No phones since Tuesday!!!!  

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

UC540 with Cbeyond SIP- new configuration in Atlanta

Hello,

Please setup the following debugs:

debug voice ccapi inout

debug ccsip messages

Then recreate the issue for both inbound/outbound calls. Post the output of the debugs here, and let me know what numbers you were calling from/to.

Thanks,

-john

2 REPLIES
New Member

UC540 with Cbeyond SIP- new configuration in Atlanta

Hello,

Please setup the following debugs:

debug voice ccapi inout

debug ccsip messages

Then recreate the issue for both inbound/outbound calls. Post the output of the debugs here, and let me know what numbers you were calling from/to.

Thanks,

-john

New Member

UC540 with Cbeyond SIP- new configuration in Atlanta

Had to add a network to an access list.  Thanks everyone for looking. 

453
Views
0
Helpful
2
Replies
CreatePlease to create content