UC560 and using the open VIC slots

steven1066 · ‎06-17-2011

Can I use the following modules in a UC560-BRI-K9:

1 x VIC2-4FXO

1 x VWIC2-1MFT-T1/E1

Or will their be DSP issues since I will be using it as an E1 and all 30 channels?

Thanks in advance,

Steven

David Trad · ‎06-20-2011

Hi Steven,

You will be fine with that configuration

Cheers,

David.

Cheers, David Trad. **When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) *

rcastill · ‎06-20-2011

Here is more info to confirm the T1/E1 card and FXO. This is a screenshot from the Quick Pricing Tool. You have access to this tool as a partner. http://www.cisco.com/web/partners/sell/enablement/quickpricingtool.html

All the best,

Robcast

Steven DiStefano · ‎06-21-2011

http://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6788/vcallcon/ps7293/reference_guide_c07-566560.html