Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

UC560 behind Juniper FW - SIP trunk calls

Hi,

I have UC560 behind a Juniper FW and SIP trunk is working fine for the outbound calls. However inbound doesn't work. Does anybody know what all ports I need to forward through the Juniper FW for SIP to work inbound direction too?

Thanks in advance,

Sam

3 REPLIES
Community Member

UC560 behind Juniper FW - SIP trunk calls

Who is the SIP provider?  Some SIP providers have multiple from IPs when sending inbound calls.

Ports:

5060

5061

5062

5063

5064

You might also need UDP 16384-32767, it all depends on the SIP provider

Community Member

UC560 behind Juniper FW - SIP trunk calls

ipcomms.net is the SIP trunk provider. They did the test and told me that my SIP end point is not visible to them.

Community Member

UC560 behind Juniper FW - SIP trunk calls

What ports and protocols do you have open on the Juniper?

967
Views
0
Helpful
3
Replies
CreatePlease to create content