This can happen at times if the UC-560 had issues during the activation process, I would advise to check and see if the license file as actually deposited on the Flash card anyway as at times it does. If not then you will need to manually activate the license through the website (Don't remember it of the top of my head).
If you have to do it manually, then you can use CCA to do it, or via CLI which will work as well.
**When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) *
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...