I have a UC560 and it has 41 IP Phones connected. There is a mix of SPA502G, SPA525G2, 7921 and 7975.
There is an issue that IP Phones are randomly freezing up and disconnecting etc. and the only way to fix it is to reboot the IP Phone, which isn't a long term solution. It can happen randomly and anytime.
Some IP Phones are PoE on a Cisco Catalyst 2960S and some are using AC adapters connected to other switches. All phones are setup with static IP addresses and are on the main data VLAN (we cannot run separate VLANs unfortunately).
Can anyone help shed some light on what could be causing this and or how to fix it?
Can you check to see which Firmware is running on the phones and also what firmware/IOS is on the UC560? Its probably not the switches, but some sort of SCCP communication between the 560 and phones. Do you notice any issues on the UC560 such as high memory or CPU usage?
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...