I have a UC560 with a single T1-PRI and I am wanting to know if the UC series has any monitoring tools so that I can actively monitor their PRI utilization. We believe that thier call flow is more than they expected but I am unable to find a way to monitor this on my side. Any help would be appreciated.
The only thing I can suggest is to use SNMP and capture the call traps, you can use a free and open source application such as FAN "Fully Automated Nagios" which can show you the call rate per minute/hour/day.
Consider looking at that
**When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) *
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...