Maybe it will be easier if you use the CCA for the VPN setup if you are comfortable with CLI. With CCA you will have EZVPN client configured on the 800 router please check the following which of the 800 series routers are supported by CCA .
Well, right now i don't have an option as a 861 router as been bought... I've just saw a couple of videos of how to configure the router using ccp... So i will give that a try and then i will configure the vpn client.
I don't want to use the vpn of the 525g2 as i will put 5 phones and that will be much bandwidth wasted.
If someone can point me to a TEL or any document that will help me to succeed in this task (EzVPN or IPSec) i will be very grateful :)
Yes this is exactly the way you may configure the VPN server in CCA and VPN client on the 861 with CCP.
You also may try to create multisite with the CCA multisite manager and enter the details for both sides only for data VPN. Then on the 861 side you may use the CCP and create the VPN using the following document and see if this will work for you.
Configure Multicast Paging on the Cisco IP Phone 7800 Series or 8800 Series Multiplatform Phone
The Cisco IP Phone 7800 and 8800 Series Multiplatform Phones provide voice communication over an Internet Protocol (IP) network...
Add Call Park on a Cisco 7800 or 8800 Series Multiplatform Phone Key Expansion Module
Call park allows the user of the phone to put an incoming call on hold so that the call can be retrieved on another phone. A call is park...