Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

VPN ID settings on SPA-942

Does anybodu know if its possible to configure VPN ID on SPA-942.

For example if the  customer has two separate VPN (VPN ID1 and VPN ID2) and wants his computer to  run over VPN ID2. Is it possile to configure the SPA-942 to communicate over VPN  ID1?

//Anna

Everyone's tags (1)
3 REPLIES
Silver

Re: VPN ID settings on SPA-942

If you login to the phone, you can set it manually under the system tab.


System  Configuration
Restricted Access Domains:
Enable Web Server:Web Server Port:
Enable Web Admin Access:Admin Passwd:
User Password:
Internet  Connection Type
Connection Type:
Static IP Settings
Static IP:NetMask:
Gateway:
PPPoE Settings
PPPoE Login Name:PPPoE  Login Password:
PPPoE Service Name:
Optional  Network Configuration
HostName:Domain:
Primary DNS:Secondary  DNS:
DNS Server Order:DNS  Query Mode:
Syslog Server:Debug  Server:
Debug Level:Primary  NTP Server:
Secondary NTP Server:
VLAN  Settings
Enable VLAN:Enable CDP:
VLAN ID:PC  Port VLAN Highest Priority:
Enable PC Port VLAN Tagging:PC Port VLAN  ID:
New Member

Re: VPN ID settings on SPA-942

I do not have the PC-port parameters on my SPA. Do I have an old firmware maybe? We currently run on 5.2.8.

The only VLAN-settings I can change are Enable VLAN, VLAN ID and Enable CDP

New Member

Re: VPN ID settings on SPA-942

Works fine now after firmwareupgrade

1637
Views
0
Helpful
3
Replies
CreatePlease to create content