Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

When a SPA8800 is added to a UC320 can I then use more than 4 SIP trunks?

When a SPA8800 is added to a UC320 can I then use more than 4 SIP trunks?

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: When a SPA8800 is added to a UC320 can I then use more than

No, the presence or absence of SPA8800s in the system does not affect the number of SIP trunks you can have - it is still four.  The FXO ports do contribute to the overall maximum number of simultaneous active calls supported by the system though, so you need to take that into account in your design.

And you will get quicker responses if you post UC300 questions in the corresponding community as per the other Dave's post.

Cheers,

Dave.

4 REPLIES
New Member

Re: When a SPA8800 is added to a UC320 can I then use more than

Hi Paul,

Just letting you know that there is a UC300 series forum HERE which should get you a more specific answer in there than in the UC500 forums.


Cheers,

David.

Cheers, David Trad. **When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) *
Cisco Employee

Re: When a SPA8800 is added to a UC320 can I then use more than

No, the presence or absence of SPA8800s in the system does not affect the number of SIP trunks you can have - it is still four.  The FXO ports do contribute to the overall maximum number of simultaneous active calls supported by the system though, so you need to take that into account in your design.

And you will get quicker responses if you post UC300 questions in the corresponding community as per the other Dave's post.

Cheers,

Dave.

Silver

Re: When a SPA8800 is added to a UC320 can I then use more than

Hello,

I have moved this thread from the SBCS-UC500 area to the UC300 area.

Regards,

Cindy Toy

Cisco Small Business

Community Manager

Regards, Cindy If my response answered your question, please mark the response as answered. Thank you!
New Member

Re: When a SPA8800 is added to a UC320 can I then use more than

David, thank you for your answer, and sorry for the post location.

Regards, Paul

868
Views
10
Helpful
4
Replies
CreatePlease to create content