cancelar
Mostrar resultados para 
Pesquisar em vez de 
Queria dizer: 
Comunicados
Bem-vindo à Comunidade de Suporte da Cisco, gostaríamos de ter seus comentários.
Community Member

Dial-peer based on origin.

I have a CUCM 10.5 and Gateway 2951 with a E1 link with R2-digital signage and 4 analog lines. My calls to mobile phones leave the analog lines (dial-peer voice 5 pots)

I need that calls to mobile phones, from the extension 7201-7220, leave for my E1 interface.

I made the following configuration, but it worked.

dial-peer voice 5 pots
 answer-address 26..
 trunkgroup FXO_CEL_SP_RJ
 corlist outgoing liga-celular
 description **Ligacao Telefone Movel Local**
 destination-pattern 0[7,9]T

dial-peer voice 111 pots
 corlist outgoing liga-celular
 description **Ligacao Telefone Movel Local**
 answer-address 72..
 destination-pattern 0[7,9]T
 port 0/0/0:0

 Can someone help me?

1 RESPOSTA
Cisco Employee

Ronaldo, Eu respondi no post

Ronaldo,

 

Eu respondi no post https://supportforums.cisco.com/pt/discussion/12589086 

 

Até logo.

44
Apresentações
5
Útil
1
Respostas
CriarFaça o para criar o conteúdo