cancelar
Mostrando los resultados de 
Buscar en lugar de 
Quiere decir: 
Avisos
¡Bienvenido a la nueva Comunidad de Soporte de Cisco! Nos encantaría conocer su opinión
New Member

puertos bloqueados E1 de CANTV vzla

El E1 es de CANTV es CAS R2 pero muchas llamadas se pierden solo levantan 8 canales los demás dan tono de ocupado

controller E1 0/0/0
 framing NO-CRC4
 ds0-group 0 timeslots 1-15 type r2-digital r2-compelled ani
 ds0-group 1 timeslots 17-31 type r2-digital r2-compelled ani
 cas-custom 0
  country venezuela
  answer-signal group-a 6
  dnis-digits min 1 max 11
  ani-digits min 0 max 11
  dnis-complete
  ani-timeout 5
  groupa-callerid-end
 cas-custom 1
  country venezuela
  answer-signal group-a 6
  dnis-digits min 1 max 11
  ani-digits min 0 max 11
  dnis-complete
  ani-timeout 5
  groupa-callerid-end

2173051: Jul 23 08:46:00.620: htsp_process_event: [0/0/1:0(23), R2_Q421_IDLE, E_DSP_SIG_0000]
2173052: Jul 23 08:46:00.620: r2_q421_ic_seize(0/0/1:0(23)) Rx SEIZURE
2173053: Jul 23 08:46:00.620: r2_reg_start_digit_collection(0/0/1:0(23))
2173054: Jul 23 08:46:00.620: r2_q421_ic_seize(0/0/1:0(23)) Tx SEIZE ACK (with 100ms delay)vnm_dsp_set_sig_state:[R2 Q.421 0/0/1:0(23)] set signal state = 0x8vnm_dsp_set_sig_state:[R2 Q.421 0/0/1:0(23)] set signal state = 0xC
2173055: Jul 23 08:46:00.620: htsp_timer - 2000 msec
2173056: Jul 23 08:46:00.620: r2_reg_process_event: [0/0/1:0(23), R2_REG_IDLE, E_R2_REG_START_COLLECTION(94)]
2173057: Jul 23 08:46:00.620: r2_reg_start_collecting(0/0/1:0(23))
2173058: Jul 23 08:46:00.620: r2_reg_timer_stop(0/0/1:0(23))
2173059: Jul 23 08:46:00.624: htsp_process_event: [0/0/1:0(23), R2_Q421_IC_SEIZE, E_HTSP_SETUP_ACK]
2173060: Jul 23 08:46:00.624: r2_q421_ic_setup(0/0/1:0(23)) E_HTSP_SETUP_ACK
2173061: Jul 23 08:46:00.624: htsp_timer_stop
 --More--         2173062: Jul 23 08:46:00.624: r2_reg_offhook(0/0/1:0(23))
2173063: Jul 23 08:46:00.624: r2_reg_process_event: [0/0/1:0(23), R2_REG_COLLECTING, E_R2_REG_OFFHOOK(95)]
2173064: Jul 23 08:46:00.624: r2_reg_ic_offhook(0/0/1:0(23))
2173065: Jul 23 08:46:00.624: R2 Incoming Voice(0/1): DSX (E1 0/0/1:22): STATE: R2_IN_IDLE R2 Got Event R2_START
2173066: Jul 23 08:46:00.796: htsp_dsp_message: SEND_SIG_STATUS: state=0x8 timestamp=33954 systime=25152747
2173067: Jul 23 08:46:00.796: htsp_process_event: [0/0/1:0(23), R2_Q421_IC_WAIT_ANSWER, E_DSP_SIG_1000]
2173068: Jul 23 08:46:00.796: r2_q421_ic_clr_fwd_idle(0/0/1:0(23)) Rx CLEAR FWD
2173069: Jul 23 08:46:00.796: r2_reg_channel_disconnected(0/0/1:0(23))
2173070: Jul 23 08:46:00.800: R2 Incoming Voice(0/1): DSX (E1 0/0/1:22): STATE: R2_IN_PRE_CALLERID R2 Got Event R2_STOP
2173071: Jul 23 08:46:00.800: r2_reg_generate_digits(0/0/1:0(23)): Tx digit '#'
2173072: Jul 23 08:46:00.800: htsp_timer - 2000 msec
2173073: Jul 23 08:46:00.800: htsp_process_event: [0/0/1:0(23), R2_Q421_IC_CLR_FWD, E_HTSP_RELEASE_REQ]
2173074: Jul 23 08:46:00.800: r2_q421_null_release(0/0/1:0(23)) E_HTSP_RELEASE_REQ
2173075: Jul 23 08:46:00.800: r2_reg_process_event: [0/0/1:0(23), R2_REG_COLLECTING, E_R2_REG_DISCONNECT(91)]
2173076: Jul 23 08:46:00.800: r2_reg_disconnect_collect(0/0/1:0(23))
2173077: Jul 23 08:46:00.800: r2_reg_timer_stop(0/0/1:0(23))

66
Visitas
0
ÚTIL
0
Respuestas
CrearPor favor para crear contenido