Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2 vpn tunnels on router to 1 asa - load balancing

Hi,

I have a project where i have a remote site and i need to transfer some pritty large files regularly.so we're installing 2 adsl lines to try to share the load.

i have a demo setup to try to get the config working. i'm using 2 ftp servers 1 on port 21 and 1 on port 3021.

the plan is to send ftp 1 (port21) up adsl 1 dialer0 and ftp 2 (port 3021) up adsl 2 dialer1. both on the same source, and the clients are on the same server to.

Currently my config is not working. Any suggestions?i'm using access lists and route maps which i believe should work.

my first thought is can i use the same acl on the crypto maps in the route map?

thanks

Pete

1 REPLY

2 vpn tunnels on router to 1 asa - load balancing

Hello,

First of all the ASA does not support load-balancing so my recommendation would be to play with routes as specific as possibles

Is the FTP server the same IP address?

What version are u running?

Rate all of the helpful posts!!!

Regards,

Jcarvaja

Follow me on http://laguiadelnetworking.com

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
197
Views
0
Helpful
1
Replies