Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

2 x 2911 HSEC router 3 ADSL connections each Site ti Site VPN Load Balancing Failover

Hello,

My senario is as described in Title.

Site A Headquarters. The router is Cisco 2911HSEC with 3 ADSL connections

Site B Remote Office. The router is Cisco 2911HSEC with 3 ADSL connections and 10 Users.

All ADSL connections have static IPs and belong to same ISP.

Need - Site to Site VPN between the routers.

Client requests to load balance the traffic, due to poor ADSL speed and have a failover senarion in case an ADSL line goes down.

Any help will be appreciated.

1 REPLY
Cisco Employee

I don't believe you will find

I don't believe you will find a One solution for this. 

 

An idea would be to have all three ADSLs paired with ADSL on the other side. 

Have 3 VTI (or GRE) tunnels up all the time (VRF-lite anybody?) and advertise routes to the other side with same metric. 

This will cause IOS to load balance natively. 

Potential problem: return path might not be the same as forward path, but it should not matter much for most applications. 

Potential cool thing you can do: All the "magical" things in routing world (Did I head PfR?). FlexVPN on top to make it more flexible. 

Benefit: Rely on IKE to bring down connections which are going down. Little-to-no management once it's up and running. 

36
Views
4
Helpful
1
Replies