Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

2nd VPN on ASA

Hi,

I have one vpn created on my ASA5510,I have to create 2nd vpn now, but when I am trying to enable it on interface it overwrite the previous command, any suggestion,

existing command for vpn A

"crypto map A interface internet"

How can I enable vpn B for same interface?

Regards,

3 REPLIES
Hall of Fame Super Blue

Re: 2nd VPN on ASA

Hi

You use sequence numbers in your crypto map as you can only apply one crypto map to an interface eg.

crypto map vpnset 1 ipsec-isakmp

crypto map vpnset 1 set peer x.x.x.x

crypto map vpnset 1 match-address "access-list"

etc...

To define second vpn just use a different sequence number eg.

crypto map vpnset 2 ipsec-isakmp

crypto map vpnset 2 set peer y.y.y.y

crypto map vpnset 2 match-address "access-list"

etc...

Note your sequence numbers do not have to be 1,2,3 etc, you could for example use 10,20,30 etc. It's up to you

HTH

Jon

Silver

Re: 2nd VPN on ASA

Make sure you use the same name for the crypto map. Since you can only apply a single crypto map to an interface, it has to be the same.

New Member

Re: 2nd VPN on ASA

Hi,

Thanks, now I have configured it, its looks no acticve tunnel on the ASA, please can you tell me few troubleshooting tips.

Regards,

125
Views
0
Helpful
3
Replies
CreatePlease to create content