11-19-2006 11:27 PM - edited 02-21-2020 02:44 PM
hello netpro:
I'm testing a ipsec nat traversal,but I can't find out a detailed example on cco,for instance how to configure or troubleshooting . could you like to provide some information about it , thanks a lot.
11-20-2006 09:47 AM
JJ,
If you are testing NAT Traversal on routers, please refer the below link for details:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a0080110bca.html
Let me know if it helps.
Regards,
Arul
** Please rate all helpful posts **
11-21-2006 05:53 PM
thank your help, I have read the document , but there is not a whole configuration about nat-t, I knew the nat-t function using udp port 4500 , I used command (debug cry isakmp and debug cry ipsec) but can't find the output that have source or destination port is 4500.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide