I have not to much experience configuring and managing VPN´s and at this moment I am facing a bit issue. I've got a remote site which is connected to the headquarters via VPN site to site IP Sec tunnel. When I am in my office I have no problem to reach the remote network, but, when I try to connect to the remote network via VPN client, I can't reach it.
in the remote office I've hot a Router 3800 (Cisco IOS Software, 3800 Software (C3845-ADVENTERPRISEK9-M), Version 12.4(13c), RELEASE SOFTWARE (fc2)) in the headquarters I've got an ASA 5520 Version 8.0(3) I've chequed access-list, and network objects and it seems everythink ok.
local network: 10.30.0.0 0.0.0.0
remote network 10.31.0.0 0.0.0.0
object-group network remote-network
network-object 172.16.27.0 255.255.255.0
network-object 10.31.0.0 255.255.0.0
object-group network network-local
network-object 0.0.0.0 0.0.0.0
access-list VPN_Remote_Access_splitTunnelAcl standard permit 10.31.0.0 255.255.0.0
ip access-list extended vpn
permit ip 10.31.0.0 0.0.255.255 any
Can someone guide me about what is missing in the config? no problem if you need more "sho run" lines.
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...