This response shows denies from multiple access lists and we have no way to know which deny goes with which access list (which deny is the one related to the original post?). It would be much better if you were to just list show access-list so that we could see the entire list and understand the context.
In looking at the original post it does suggest that there are permit lines which include the log parameter and the deny does not:
permit tcp any any eq 2967 log (7173566 matches)
deny ip any any (255731 matches)
It would really help if we could see the access list. And showing it out of the config would probably be better than out of show access-list.
You have to configure syslog server for recving all log of PIX..and you can't log locally(means on PIX itself) all logs bcze it's mostly firewall genrated so many logs and due to limited HDD space on PIX, pix wil stop working after full HDD..so enable syslog on pix and rcvd log on other configured server to view ALL LOGS..........pls let me know for any further clearfication..........
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...