Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

acl needed on site 2 site vpn ? asa 5520

I have remote access vpn working and am setting up a site to site for remote location. I ran the wizard from asdm on 5520, connecting to sonicwall tz 150 that used to connect to our pix 515, my question is do I need to create any acl for this connection? The s2s tunnel connects, and I can even vnc to a pc on the other end, but cant connect to servers at local plant, or ping devices from remote location? Im close, but am missing something.. any advice?

4 REPLIES
Green

Re: acl needed on site 2 site vpn ? asa 5520

Can you post your asa config?

New Member

Re: acl needed on site 2 site vpn ? asa 5520

sure, see below

Green

Re: acl needed on site 2 site vpn ? asa 5520

Could you be more specific about your problem. For instance, what connection works, from where to where? Which connection doesn't work, from where to where? etc.

New Member

Re: acl needed on site 2 site vpn ? asa 5520

sure, the (74.x tunnel group l2l remote peer to hgnwhse) to 10.2.0.0 (local site)

the tunnel itself will connect and I can vnc to a pc on the remote side (hgnwhse side) to here 10.2.0.0 (local side) but applications such as ibm iseries, lotus notes, any of the servers at local site cant be pingged or reached from remote site.

145
Views
0
Helpful
4
Replies
CreatePlease to create content