Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started.

New Member

acounting problem at ACS

i configurated ipsec remote vpn at asa. user authenticate from acs via radius protocols.all of them are ok but we do not see user name, ip address mac-address at acs.

what must i do?? i must be do any configuration at ASA or ACS?

this is my asa configuration part for vpn.

aaa-server cosmoasa1 protocol radius
aaa-server cosmoasa1 (inside) host 192.168.193.xx
key cosmoasa1test
radius-common-pw cosmoasa1test
aaa authentication ssh console LOCAL

group-policy RAVPN attributes

dns-server value 192.168.193.10 192.168.193.11

vpn-idle-timeout 45

vpn-tunnel-protocol IPSec

split-tunnel-policy tunnelspecified

split-tunnel-network-list value Split_Tunnel

default-domain value azercosmos.local

tunnel-group vpnclient type remote-access

tunnel-group vpnclient general-attributes

address-pool VPNPOOL

authentication-server-group cosmoasa1

default-group-policy RAVPN

  • VPN
205
Views
0
Helpful
0
Replies