I have a VPN concentrator 3005 but unknowingly I created a user and gave it admin right. Now i do not have admin access on both the user and the old admin account. I have read about password recovery but I am confused on the solution note that says if I am running a code 2.5 or earlier, i should contact TAC. Question " is my concentrator running 2.5 or 4.7 based on the information below.
Bootcode Rev: Cisco Systems, Inc./VPN 3000 Concentrator Series Version 2.5.Rel Jun 21 2000 18:57:52
Software Rev: Cisco Systems, Inc./VPN 3000 Concentrator Version 4.7.Rel Mar 10 2005 14:58:16
Thanks Rohit. Does that mean I have to contact TAC for assistance or will the password recovery procedure still work for me even though the bootcode is release 2.5? I will need a password recovery procedure for releasae 2.5
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...