Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AIM-VPN/SSL-2 installation in Cisco 2821

Hi all,

I have router cisco 2821 wit IOS version 12.4(25d)

I also have Cisco AIM-VPN/SSL-2 Encryption Module for this router.

I inserted this module in AIM slot 0 but can not see it.

I found in kb:

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htvpnssl.html#wp1067692

but I don't have "crypto engine aim" command

Router(config)#crypto engine ?

  accelerator  Crypto hardware device

  onboard      Onboard Crypto Engine

  software     Software crypto engine

when system is booting I can see:

0004F4            UNKNOWN                  AIM

What should I have to change to enable this module?

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: AIM-VPN/SSL-2 installation in Cisco 2821

Zigmunds,

AIM/SSL engines require

IOS 12.4(9)T at least, while you're running older 12.4 mainline release.

http://www.cisco.com/en/US/prod/collateral/routers/ps5853/data_sheet_vpn_aim_for_18128003800routers_ps5853_Products_Data_Sheet.html

Marcin

2 REPLIES
Cisco Employee

Re: AIM-VPN/SSL-2 installation in Cisco 2821

Zigmunds,

AIM/SSL engines require

IOS 12.4(9)T at least, while you're running older 12.4 mainline release.

http://www.cisco.com/en/US/prod/collateral/routers/ps5853/data_sheet_vpn_aim_for_18128003800routers_ps5853_Products_Data_Sheet.html

Marcin

New Member

Re: AIM-VPN/SSL-2 installation in Cisco 2821

Hello Marcin,

thanks for your answer, will try with newest IOS version.

Zigmunds

1767
Views
0
Helpful
2
Replies