Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Allocation of IP Addresses from local pool for VPN users.

Hi all,

Apols if this is in the wrong place - please move if need.

OK, the issue.

Extract of config :-

crypto isakmp client configuration group ACCESS

...

pool TEST

...

...

ip local pool TEST 10.0.0.2 10.0.0.253

ip local pool TEST 11.0.0.2 11.0.0.253

So, the small snippet above allows my users to connect to our VPN service and work as normal, but what I'd like to do is to get the system

to allocate the 10.x.x.x range first, then allocate the 11.x.x.x.

At present the allocation seems to be random.

Now I have seen things to do with groups etc but none refers to doing it when the group is allocated under a crypto client.

If anyone has any knowledge or ideas then please reply,

Regards,

Stephen

Everyone's tags (4)
530
Views
0
Helpful
0
Replies
CreatePlease login to create content