Analogs of Virtual-Template interfaces on Cisco ASA
Are there analogs of Virtual-Template interfaces on Cisco ASA?
When Cisco router serves as an L2TP IPsec VPN server, it uses PPP IPCP configuration request to notify client of server's IP address on a negotiated PPP link. For example, client connects to 192.168.0.1 (address of router's physical interface with crypto-map) and at the end router assignes IP address 10.0.0.20 to the client and notifies him that IP address of another L2TP tunnel endpoint is 10.0.0.1 (address of router's Virtual-Template interface).
But Cisco ASA doesn't have Virtual-Template interfaces and instead of 10.0.0.1 notifies the client that server's IP address on a negotiated PPP link is address of router's physical interface - 192.168.0.1. That poses problems.
Is that result of misconfiguration, or IP address 10.0.0.1 should be somehow bundled with client's IP address 10.0.0.20 in RADIUS attributes?
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...