Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

AnyConnect 3.1.04072 Allow Remote Users

I can't find Windows VPN Establishment with "Allow Remote Users" in Profile editor. Is it deprecated?

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

AnyConnect 3.1.04072 Allow Remote Users

Pavlo,

Could be a limitation of profile editor you're running (standalone or from ASDM?)

The value exists in VPN XML reference:

http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect31/administration/guide/apxAvpnxmlref.html

and was not retired to my knowledge.

M.

3 REPLIES
Cisco Employee

AnyConnect 3.1.04072 Allow Remote Users

Pavlo,

Could be a limitation of profile editor you're running (standalone or from ASDM?)

The value exists in VPN XML reference:

http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect31/administration/guide/apxAvpnxmlref.html

and was not retired to my knowledge.

M.

New Member

AnyConnect 3.1.04072 Allow Remote Users

Yeap it was limitation of standalone one.

I upgraded ASDM and created profile with it

webvpn

svc profiles AnyConnect_profile_allow_RU disk0:/anyconnect_profile_allow_ru.xml

group-policy anyconnect attributes

webvpn

  svc profiles value AnyConnect_profile_allow_RU

more disk0:/anyconnect_profile_allow_ru.xml

AllowRemoteUsers

But wasn't able to connect to VPN with RDP connection.

I have ASA Version 8.2(1), but there is no record about ASA version limitation.

AnyConnect version is anyconnect-win-3.1.04072-k9.pkg


Cisco Employee

AnyConnect 3.1.04072 Allow Remote Users

Collect DART package and check whether the profile is/was used by anyconnect during the failure.

I'm not aware of restrictions either, but it's hard to map things 1-1 at a glance, all the time.

M.

1495
Views
0
Helpful
3
Replies
CreatePlease to create content