AnyConnect 3.1.05160 - no valid certificates available for authentication
one of our customer is running the above AC version and hitting the above error.
form the DART file I gathered the following information
Description : Server certificate validation failed with the following errors: Certificate does not match the server name. Certificate is from an untrusted source. Certificate is not identified for this purpose. Certificate is malformed. Certificate is explicitly distrusted.
I am sure the Cert is valid however reading the following article got me thinking, https://supportforums.cisco.com/discussion/11533701/cisco-anyconnect-3008057-certificate-validation-failure.
could this be the same reason, haven't mentioned this to my customer as he is running 3.1.05. but could this be related to the same issue?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...