Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AnyConnect and Clientless SSL-VPN

Are there any issues in running Cisco AnyConnect and Clientless SSL-VPN alongside each other??

I am currently looking into adding AnyConnect functionality to an ASA that has currently configured to run Clientless SSL-VPN. The Clientless system will not be removed. I know how to configure it, I am wondering if someone has already configured this or if there are any issue with this setup?

2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

Re: AnyConnect and Clientless SSL-VPN

Hi Daniel

It's a bit tricky if you want a granular authentication and authorization, but it works.

I'm running an ASA with IPSec, SSL Client and Clientless SSL.

Each of those VPNs with username/one-time-password and certificate based authen.

The main challenge is to build up a clean structure of Profile Maps, Connection Profiles, Group Policies and Dynamic Access Policies.

Feel free to ask further questions...

Stephan

New Member

Re: AnyConnect and Clientless SSL-VPN

I've tested this and you can do. I had both setup on my ASA.

5 REPLIES
New Member

Re: AnyConnect and Clientless SSL-VPN

Hi Daniel

It's a bit tricky if you want a granular authentication and authorization, but it works.

I'm running an ASA with IPSec, SSL Client and Clientless SSL.

Each of those VPNs with username/one-time-password and certificate based authen.

The main challenge is to build up a clean structure of Profile Maps, Connection Profiles, Group Policies and Dynamic Access Policies.

Feel free to ask further questions...

Stephan

New Member

Re: AnyConnect and Clientless SSL-VPN

I've tested this and you can do. I had both setup on my ASA.

New Member

Re: AnyConnect and Clientless SSL-VPN

Thank you very much for your answers I will be implementing this in the next few days hopefully I will not run into any issues

Thanks for your help

Dan

Bronze

AnyConnect and Clientless SSL-VPN

Hi Stephan,

Is there any document showing how to do it?

I have some anyconnect profile configured and I enabled clientless connection on them.

But when I access the URL https://"asa address" the ASA send me straight to anyconnect instalation.

If the profile is enable for anyconnect and clientless is ther a way to choose which way to connect?

Thanks!

New Member

Re: AnyConnect and Clientless SSL-VPN

In group Policy edit > Advanced > AnyConnect CLient > Login Settings

Prompt user to choose

2992
Views
0
Helpful
5
Replies