I have the AnyConnect client 2.2.0133 working well through Zone Alarm v.7. However, everytime I connect, the ASA does a version check and runs vpndownloader.exe from a temp internet location. This causes Zone Alarm to prompt the user to allow vpndownloader.exe to connect to the Internet. Even if the "remember this setting" option is selected in Zone Alarm, subsequent AnyConnect connections cause the prompt to come back.
I know this is caused by the location change in the temp internet folder where vpndownloader runs from.
My question is;
1. Is there a way to force Zone Alarm to ignore the path info and check only the program? OR
2. Is there a setting to stop the ASA from doing a version check on the client if it is already installed?
3. Is there a better firewall that you would recommend for use with AnyConnect?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...