I have configured anyconnect with ikev2 at our two different sites.
Client PC have anyconnect pre configured on their PCs.
Under anyconnect profile at each site i also put the IP of other site ASA VPN in case if users at site 1 connects to ASA at site 1 then if that ASA is down they should automatically connect to Site 2 ASA.
Need to know how can i test if the users are able to connect to back ASA.
Will this test be ok
Turn off ASA at site 1 then test from the PC using Site 1 connection name as Site 1 ASA is down or powered off should it automatically connect to
Helps meet PCI* compliance.
Threat protection built into ISR and ISRv branch routers and CSR
Complements ISR Integrated Security
Lightweight IPS solution with low TCO (Total Cost of Ownership) and automated signature updates
Supports VRF (16.6)
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...