we have a working ipv4 SSL VPN with anyconnect environment. We now wanted to add IPv6 support. ASA is fully working on IPv6 and the client gets an IPv6 address. The problem now is, that the client can't reach any ipv6 hosts. It is not able to ping ASA ipv6 interfaces or other ipv6 clients. I guess this is due to the fact that the client doesn't get an IPv6 default gateway.
The ipconfig entry under windows lists as default gateway :: and the v4 address
Shouldn't the ASA send RAs to the client so that it could know the default gateway and what could keep the client from receiving these RAs?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...