I have an ASA 5540 running 9.0.3 and a client running Windows 7 and Anyconnect 3.1.04072. The client authenticates to the VPN successfully and an "ipconfig" on the client reveals that it successfully pulls an IP address from the pool on the ASA. However, the user can't get to resources over the VPN and when i look at the database on the ASA, the session is missing it's assigned IP address (see below).
Session Type: AnyConnect
Username : XXX\XXXXXXX Index : 25967 Public IP : 2XX.XXX.XXX.232 Protocol : AnyConnect-Parent License : AnyConnect Essentials Encryption : AnyConnect-Parent: (1)none Hashing : AnyConnect-Parent: (1)none Bytes Tx : 12340 Bytes Rx : 792 Group Policy : SOITrane Tunnel Group : DefaultWEBVPNGroup Login Time : 11:22:59 EDT Tue Sep 16 2014 Duration : 0h:15m:15s Inactivity : 0h:12m:54s NAC Result : Unknown VLAN Mapping : N/A VLAN : none
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...