After installing and running the logmein - the anyconnect is broken. I have tried uninstalling and reinstalling the anyconnect but still does not fix the problem.
Event log shows
Faulting application vpnagent.exe, version 188.8.131.52, time stamp 0x48acc732, faulting module vpnagent.exe, version 184.108.40.206, time stamp 0x48acc732, exception code 0xc0000005, fault offset 0x0000b4d8, process id 0x2f40, application start time 0x01ca6c10f1b15e15.
Cisco AnyConnect VPN Agent
The Cisco AnyConnect VPN Agent service terminated unexpectedly. It has done this 8 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...