AnyConnect VPN Client version 3.1.04072, Virtual Adapter Link Speed only 1/100 of physical
Just upgrade to AnyConnect VPN client version 3.1.04072
Platform: Windows 7
ASA: Both version 8 and version 9
Install/upgrade pretty smoonth, also dial to ASA version 8/9 no problem.
Adapter speed set by VPN client.
I found roughly the Virutal Adatper link speed is setting to 1/100 of physical speed.
Say, if I have phisical connect to 1GB network, the VPN Adapter speed is 10MB.
if I have WiFi connected, and Windows 7 setup WiFi adaptor speed at 120MB, after VPN connected, the VPN adapter link speed is fixed to 1Mbps. You cannot download/upload above of this link speed set by adapter.
You can confirm this by open Windows Task Manager and check network tab, read the Adapter Link Speed.
AnyConnect VPN client Version 2.5 is fine, always follow the physical interface speed.
Confirmed this has nothing to do with ASA, also nothing to do with VPN profile, AnyConnect Connection Profile and Group Policy. Simply replace AnyConnect client can trigger this bug.
Just wonder if anyone else see same problem? How about other Version 3 client?
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...