Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

anyconnect vpn client woes

hi, i am having troubles connecting to an asa 5505 with anyconnect vpn client:

config:

crypto ca trustpoint localtrust

enrollment self

fqdn ssl.blah.com

subject-name CN=ssl.blah.com

keypair sslvpnkeypair

crl configure

crypto ca certificate chain localtrust

ssl trust-point localtrust outside

webvpn

enable outside

svc image disk0:/any.pkg 1

svc enable

group-policy SSLCLientPolicy internal

group-policy SSLCLientPolicy attributes

dns-server value 4.2.2.2

vpn-tunnel-protocol svc

address-pools value vpnpool

group-policy DfltGrpPolicy attributes

dns-server value 4.2.2.2

vpn-tunnel-protocol svc webvpn

address-pools value vpnpool

tunnel-group DefaultWEBVPNGroup general-attributes

address-pool vpnpool

tunnel-group DefaultWEBVPNGroup webvpn-attributes

group-alias SSLVPNClient enable

tunnel-group SSLClientProfile type remote-access

!

access-list nat0 extended permit ip 10.191.191.0 255.255.255.0 10.199.199.0 255.255.255.0

nat (inside) 0 access-list nat0

any idea what is wrong?

i have been stumped on this for hours

thanks

ERRROR posted below since out of space

3 REPLIES
Community Member

Re: anyconnect vpn client woes

%ASA-5-737003: IPAA: DHCP configured, no viable servers found for tunnel-group 'DefaultWEBVPNGroup'

%ASA-4-722041: TunnelGroup GroupPolicy User IP No IPv6 address available for SVC connection

%ASA-5-722033: Group User IP First TCP SVC connection established for SVC session.

%ASA-4-722051: Group User IP Address <10.199.199.1> assigned to session

webvpn_rx_data_tunnel_connect

CSTP state = HEADER_PROCESSING

http_parse_cstp_method()

...input: 'CONNECT /CSCOSSLC/tunnel HTTP/1.1'

webvpn_cstp_parse_request_field()

...input: 'Host: c-asasasdadsdasadsfast.net'

Processing CSTP header line: 'Host: asdfsdfsadf.asdfadfsf.net'

webvpn_cstp_parse_request_field()

...input: 'User-Agent: Cisco AnyConnect VPN Agent for Windows 2.3.2016'

Processing CSTP header line: 'User-Agent: Cisco AnyConnect VPN Agent for Windows 2.3.2016'

Setting user-agent to: 'Cisco AnyConnect VPN Agent for Windows 2.3.2016'

webvpn_cstp_parse_request_field()

...input: 'Cookie: webvpn=2839526471@262144@1248130490@E8EA84BBD9CB0B605099F7E7C7E65F5FC6CEB67A'

Processing CSTP header line: 'Cookie: webvpn=2839526471@262144@1248130490@E8EA84BBD9CB0B605099F7E7C7E65F5FC6CEB67A'

Found WebVPN cookie: 'webvpn=2839526471@262144@1248130490@E8EA84BBD9CB0B605099F7E7C7E65F5FC6CEB67A'

WebVPN Cookie: 'webvpn=2839526471@262144@1248130490@E8EA84BBD9CB0B605099F7E7C7E65F5FC6CEB67A'

IPADDR: '2839526471', INDEX: '262144', LOGIN: '1248130490'

webvpn_cstp_parse_request_field()

...input: 'X-CSTP-Version: 1'

Processing CSTP header line: 'X-CSTP-Version: 1'

Setting version to '1'

webvpn_cstp_parse_request_field()

...input: 'X-CSTP-Hostname: asd-PC'

Processing CSTP header line: 'X-CSTP-Hostname: e'

Setting hostname to: 'asd-PC'

webvpn_cstp_parse_request_field()

...input: 'X-CSTP-Accept-Encoding: deflate;q=1.0'

Processing CSTP header line: 'X-CSTP-Accept-Encoding: deflate;q=1.0'

webvpn_cstp_parse_request_field()

...input: 'X-CSTP-MTU: 1406'

Community Member

Re: anyconnect vpn client woes

Processing CSTP header line: 'X-CSTP-MTU: 1406'

webvpn_cstp_parse_request_field()

%ASA-5-722010: Group User IP SVC Message: 16/ERROR: Failed to fully establish a connection to the secure gateway (proxy authentication, handshake, bad cert, etc.)..

%ASA-5-722037: Group User IP SVC closing connection: User Requested.

%ASA-4-113019: Group = DefaultWEBVPNGroup, Username = guest, IP = connectingip, Session disconnected. Session Type: SSL, Duration: 0h:00m:05s, Bytes xmt: 11323, Bytes rcv: 3138, Reason: User Requested

...input: 'X-CSTP-Address-Type: IPv6,IPv4'

Processing CSTP header line: 'X-CSTP-Address-Type: IPv6,IPv4'

webvpn_cstp_parse_request_field()

...input: 'X-DTLS-Master-Secret: D9DB873DDC2A1B14B3E35AD78BBE0EED3EB3850EC8712364C543DBDDBE0D0BFEA5171E7DE46A0C8BE9EBEB6AF36F26D7'

Processing CSTP header line: 'X-DTLS-Master-Secret: D9DB873DDC2A1B14B3E35AD78BBE0EED3EB3850EC8712364C543DBDDBE0D0BFEA5171E7DE46A0C8BE9EBEB6AF36F26D7'

webvpn_cstp_parse_request_field()

...input: 'X-DTLS-CipherSuite: AES256-SHA:AES128-SHA:DES-CBC3-SHA:DES-CBC-SHA'

Processing CSTP header line: 'X-DTLS-CipherSuite: AES256-SHA:AES128-SHA:DES-CBC3-SHA:DES-CBC-SHA'

webvpn_cstp_parse_request_field()

...input: 'X-CSTP-Protocol: Copyright (c) 2004 Cisco Systems, Inc.'

Processing CSTP header line: 'X-CSTP-Protocol: Copyright (c) 2004 Cisco Systems, Inc.'

Validating address: 0.0.0.0

CSTP state = WAIT_FOR_ADDRESS

webvpn_cstp_accept_address: 10.199.199.1/255.255.255.0

webvpn_cstp_accept_ipv6_address: No IPv6 Address

CSTP state = HAVE_ADDRESS

SVC: NP setup

np_svc_create_session(0x40000, 0xD5291360, TRUE)

webvpn_svc_np_setup

SVC ACL Name: NULL

SVC ACL ID: -1

SVC ACL ID: -1

vpn_put_uauth success!

SVC IPv6 ACL Name: NULL

SVC IPv6 ACL ID: -1

SVC: adding to sessmgmt

SVC: Sending response

Unable to initiate NAC, NAC might not be enabled or invalid policy

CSTP state = CONNECTED

webvpn_rx_data_cstp

webvpn_rx_data_cstp: got message

SVC message: t/s=3/16: Failed to fully establish a connection to the secure gateway (proxy authentication, handshake, bad cert, etc.).

Called vpn_remove_uauth: success!

webvpn_svc_np_tear_down: no ACL

webvpn_svc_np_tear_down: no IPv6 ACL

np_svc_destroy_session(0x40000)

Community Member

Re: anyconnect vpn client woes

Anyone come up with information on the above error. I have some users that are starting to see it after upgrading to 2.3.2016. At first glance they appear to all be Vista machines.

My error is as follows:

SVC Message: 16/ERROR: Failed to fully establish a connection to the secure gateway (proxy authentication, handshake, bad cert, etc.)..

2209
Views
0
Helpful
3
Replies
CreatePlease to create content