Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Anyconnect VPN on Cisco 2821 using 15 code

I am trying to download the Cisco AnyConnect VPN Client from Cisco 2821 using 15 Code. I have configured using the following configuration.

 

ip local pool webvpn-pool 192.168.15.80 192.168.15.90

 

webvpn gateway Cisco-WebVPN-Gateway
 ip address X.X.X.X port 443
 ssl encryption rc4-md5
 ssl trustpoint my-trustpoint
 inservice
 !
webvpn gateway Cisco-WebVPN-Gatewa
 ssl trustpoint my-trustpoint
 no inservice
 !
webvpn install svc flash:/webvpn/anyconnect-win-3.1.03103-k9.pkg sequence 1
 !
webvpn context Cisco-WebVPN
 title "Abarron WebVPN - Powered By Cisco"
 ssl authenticate verify all
 !
 acl "ssl-acl"
   permit ip 192.168.15.0 255.255.255.0 192.168.15.0 255.255.255.0
   permit ip 192.168.14.0 255.255.255.0 192.168.14.0 255.255.255.0
 !
 login-message "Cisco Secure WebVPN"
 !
 policy group webvpnpolicy
   functions svc-enabled
   filter tunnel ssl-acl
   svc address-pool "webvpn-pool" netmask 255.255.255.0
   svc rekey method new-tunnel
   svc split include 192.168.15.0 255.255.255.0
 inservice

When I try to get downloaded the VPN Client using the URL

https://X.X.X.X

The page is opened but when I click on Proceed then it says No Data Received. Please help and also the attachment.

 

 

 

 

 

 

 

142
Views
0
Helpful
0
Replies