I am trying to get the SBL to work for Windows XP/Vista/7 using an ASA5510 running 8.2 (1). When I login to the WebVPN, it installs the anyconnect client and SBL components, and copies the xml profile. When I reboot, I get nothing popping up (on an XP machine) before login...any ideas? I have included below my config for the webvpn...I also worked with TAC and they could not find the problem either. Any help you can give me is appreciated.
webvpn enable outside svc image disk0:/anyconnect-win-2.5.0217-k9.pkg 1 svc profiles profile1 disk0:/AnyConnect.xml svc enable group-policy WebVPNPolicy internal group-policy WebVPNPolicy attributes wins-server value 192.168.2.10 192.168.2.13 dns-server value 192.168.2.10 192.168.2.13 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value WebVPNACL webvpn svc modules value vpngina svc profiles value profile1
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...