Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Anyconnect

Can someone please verify that I cannot use the anyconnect vpn software to connect to PIX or VPN concentrator. If this is the case how would a windows 7 user connect to cisco VPN concentrator. Would going to an ASA be the only option?

Thanks for you feedback in advance.

SS

3 REPLIES

Re: Anyconnect

Cisco has come up with Anyconnect VPN client for
64 bit and window 7.



Please go through following release notes for anyconnect:


http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect22/release/notes/anyconnect22rn.html


You are looking for support of 64 bit on VPN 3000 and this is not possible
as this feature is not supported on it.



Please go through following link:



http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5743/ps5749/ps2284/prodend-of-life_notice0900aecd805cd5a0.html
New Member

Re: Anyconnect

HI,

If replacing the concentrator with ASA is your option go with what Armando says.

Otherwise you can setup L2TP over IPSec for all kind of Window OS it conects with Windows NAtive VPN client

LINK:www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a0080094aca.shtml

Regards,

Pradhuman

New Member

Re: Anyconnect

If conecting to a PIX/ASA shrew.net client will work. If conecting to concentrator, the shrew client has issues. It will connect, but won't pass traffic, so will need to upgrade to ASA.

556
Views
0
Helpful
3
Replies