I have a ASA 5505 connected to inside interface of my broadband DSL Router. ASA 5505 will have private IP on its inside & outside interface. Only DSL Router outside interface connected to internet will have Public IP Address. This IP address will be used for PAT.
My doubt is whether ASA 5505 can build Easy VPN tunnel from its private outside IP address. DSL router is acting as the PAT device in front of the same.
***Or I need to have Public IP Address on the ASA 5505 outside interface for the Easy VPN remote tunnel***
Can sonebody share the configuration of this type of setup.
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...