ASA 5505 to 5510 established but no traffic

[gene.mccullough]

I've established a site-to-site connection between the devices, but cannot get any traffic.  Both ends can still reach Internet, but cannot ping any addresses either way, nor browse or other traffic.  I have no idea how to debug, can post anything for help.

Under monitoring, it shows the connection is established.

Thanks in advance

[manish arora]

Not able to ping but you can rdp means that the device is running some kind of firewall on it or anti virus with firewall capability.

thanks

Manish

[gene.mccullough]

Unfortunately, can't ping anything, either direction.  Cannot browse windows shares, or ping, but can rdp to machines that are enabled.  Any thoughts?

Thanks again, gene

[manish arora]

Issue command  sysopt connection permit-vpn  on both the firewalls. Try windows share using ip address also you might have to reduce the TCP MSS on the windows fileshare to accomodate the ipsec encapsulation on the ip packet. also, check again for any local server or machine firewall is truned off and inside access list on firewall are set on permit any any.

thanks

Manish