Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ASA 5510 L2L Dynamic IP and ASDM

Hello.

I'm looking for a ASDM guide to implement L2L tunnel between a ASA 5510 with static ip and a device with a dynamic ip. I relly suck when it comes to CLI so I would like some help setting this up via ASDM. I've got it working once but that was a long time ago so i don't remember the way of doing this. I think it all went bad when I added a Remote Access VPN for a client.

5 REPLIES

Re: ASA 5510 L2L Dynamic IP and ASDM

Community Member

Re: ASA 5510 L2L Dynamic IP and ASDM

Follow up.

I'm getting theese errors:

Group = DefaultRAGroup, IP = x.x.x.x, Removing peer from peer table failed, no match!

Re: ASA 5510 L2L Dynamic IP and ASDM

That is because you have not configured a dynamic CRYPTO group for remote VPNs - check your config.

HTH>

Community Member

Re: ASA 5510 L2L Dynamic IP and ASDM

yes, it was the Linksys router with the dynamic ip that only could authanticate with ip and not name.

It's working now with a different router.

Re: ASA 5510 L2L Dynamic IP and ASDM

np - glad to help.

1375
Views
0
Helpful
5
Replies
CreatePlease to create content