Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

asa 5510 update 9.1 hangs

With an asa 5510 box we tried to upgrade the  ASA version from 8.4 to 9.1. After starting the load from flash, it hung (see below). I ended up tftp booting an 8.4 version, and was able later to upgrade to asa version 9.0(3)6 without hang on boot.

I am not sure why the 9.1 load hung. It appears by my review of the documentation that this device is capable of running the 9.1 version. I'm not likely to try 9.1 until I understand the issue.

Loading disk0:/asa915-k8.bin... (HANG, local power cycle)

Booting system, please wait...


+ CISCO SYSTEMS
+ Embedded BIOS Version 1.0(11)4 03/21/08 17:09:54.41

+ Low Memory: 631 KB
+ High Memory: 1024 MB
+ PCI Device Table.

 

thanks for any ideas.

John

 

1 REPLY
New Member

 Make sure ASA have 8.4 (6)

 

Make sure ASA have 8.4 (6) before upgrade to 9.1

Pre-9.1(2.8) ASA Version
First Upgrade to:
Then Upgrade to:

8.2(1)

8.4(6)

9.1(2.8) or 9.1(3) or later

8.4(4)

8.4(6)

9.1(2.8) or 9.1(3) or later

9.0(1)

9.0(3)

9.1(2.8) or 9.1(3) or later

9.1(1)

9.1(2)

9.1(2.8) or 9.1(3) or later

99
Views
0
Helpful
1
Replies
CreatePlease to create content