Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA 5520 (7.1(1)) SSL IP address assignment.

My (newly installed) ASA 5520 does not assign IP adresses to the SVC tunnel group. It works only when I assign an IP address on a user level. What must I do to fix this?

3 REPLIES
Bronze

Re: ASA 5520 (7.1(1)) SSL IP address assignment.

There are various ways to assign IP addresses to the clients.DHCP, Local pools, manual configuration etc. You can either use DHCP method or local pools. For details see below link.

http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_1/conf_gd/vpnadd.htm

New Member

Re: ASA 5520 (7.1(1)) SSL IP address assignment.

I konw: Thing is: I want to use local pools, but then no IP addresses is assigned to the SSL cliënt!

New Member

Re: ASA 5520 (7.1(1)) SSL IP address assignment.

You probably solved it by now, but I'll reply anyway :-)

Unless you use the Tunnel Group listbox on the startpage you'll have to use the default tunnel group like this:

tunnel-group DefaultWEBVPNGroup general-attributes

address-pool VPN-SSL

authentication-server-group (outside) RADIUS

default-group-policy Global-Group-Policy

120
Views
0
Helpful
3
Replies
CreatePlease login to create content