asa 5520 - iphones are disconnected after a certain time
few people of our university connect with their iPhone (protocol IPSec) to our asa (version 8.0(4)). The VPN connection starts correctly and they can use their iphone without problem. But after about 57min and 33s, all iPhones are disconnected from the ASA (IKE error ?):
Group = yyyy, Username = xxxx, IP = 134.21.xx.xx, QM FSM error (P2 struct &0xce84ccf0, mess id 0xe2ee3d2d)!
Group = yyyy, Username = xxxx, IP = 134.21.xx.xx, Removing peer from peer table failed, no match!up = yyyy, Username = xxxx, IP = 134.21.xx.xx, construct_ipsec_delete(): No SPI to identify Phase 2 SA!
Re: asa 5520 - iphones are disconnected after a certain time
my idle timeout is 60min and the maximum connect time is unlimited. Only iPhones are disconnect after 57min 33s, but all iphones. We have another clients(WindowsXP/Vista/MacOSX/Linux) and they are no problem.
I have put in attachement the details about iPhone connection, 20 seconds before its disconnection.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...