06-03-2010 09:09 AM - edited 02-21-2020 04:40 PM
Hi,
I need to create a Ipsec VPN site to site between an ASA 8.x and a generic router with a non-static IP address. I saw a document about creating a similar infrasturcture between two PIX (one with static IP and one with Dynamic IP) with 7.x version. Can someone help me?
Thank you
Solved! Go to Solution.
06-03-2010 09:18 AM
Hi Cristiano,
Hope this link helps:
Basically the ASA has a static IP and the remote device has a dynamic IP.
You configure a normal site-to-site tunnel on the remote end, but on the ASA side configure a dynamic tunnel to accept the connection from the remote device.
This scenario will work, the only restriction is the tunnel will only be able to initiate from the remote end device (in the example above an IOS router).
Federico.
06-11-2010 09:06 AM
Hi,
Please rate the threat and mark it as answered (if you find it helpful).
Thank you,
Federico.
06-03-2010 09:18 AM
Hi Cristiano,
Hope this link helps:
Basically the ASA has a static IP and the remote device has a dynamic IP.
You configure a normal site-to-site tunnel on the remote end, but on the ASA side configure a dynamic tunnel to accept the connection from the remote device.
This scenario will work, the only restriction is the tunnel will only be able to initiate from the remote end device (in the example above an IOS router).
Federico.
06-04-2010 07:42 AM
Thanks for suggestion. I'll try it.
06-11-2010 01:28 AM
Now it's working. Thanks
06-11-2010 09:06 AM
Hi,
Please rate the threat and mark it as answered (if you find it helpful).
Thank you,
Federico.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: