asa accessing problem after Restoring Single Context Mode
I have done the basic configuration on asa 5520. For active active availablity i changed the mode to multiple context mode and encountered some issues with the setup and i restored back to single context mode by the command mode single in global config mode.
After the asa rebooted i am not able to access the asa through telnet, http or asdm.
I tried with console cable as well but could not get in to the asa. Can any one please let me know how can i access the asa
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...