Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ASA Client VPN Access using Pre Shared keys

I have a ASA 5510 that until recently has successfully connected all Cisco VPN clients.

However there is now a group of users who have moved premises and cant gain access. When I switch off the IKE Peer ID Validation, using a Pre Shared Key, it works fine, these users have no problem connecting. As soon as I switch it back on these users in this particular premises fail to connect, are there any firewall settings at the remote site I should be aware of that may cause this issue

1 REPLY
Silver

Re: ASA Client VPN Access using Pre Shared keys

ASA has three default tunnel groups, one for each of the following connection types: IPSec remote access, IPSec LAN-to-LAN, and WebVPN. Peer ID validate is the attribute that is not available in external groups. Following link may help you

http://www.cisco.com/en/US/products/hw/routers/ps368/prod_configuration_guide09186a0080932371.html

467
Views
0
Helpful
1
Replies
CreatePlease to create content